CRUISE2 5G Grip Tsled Handheld RFID Reader
5G Speed, Dual Form Switching
This handheld RFID scanner features 5G high-speed transmission and a 6.0-inch display, supported by a dual hot-swappable battery system for long-lasting operation. It enables seamless switching between RFID and barcode scanning modes with multiple data capture options and IP67-rated protection. Powered by the Impinj E710 platform and a proprietary algorithm, it delivers up to 1,300 tags/s with strong anti-interference performance for demanding multi-scenario applications.
Specifications
Physical Characteristics
Dimensions
7.4 in. L x 3.6 in. W x 5.4 in. T
189(H)*91(W)*138(T) mm
Weight
23.6 oz. / 668 g with battery
Display
6 inch display with capacitive touch, 1440(H)×720(W)
Power
8350 mAh (Main unit 5000mAH + Handle 3350mAh replaceable), the handle can also be equipped with a 6700 mAh battery.
Bottom Type C USB port, support QC3.0 fast charging, intelligent recognition of PC and charger
SIM Card Slot
SIM (Nano-sim*2)
Expansion Slot
Micro SD Card, compatible up to 256GB
Interface / Communication
Waterproof Type C USB interface, support USB2.0 HighSpeed, support OTG.
Notifications
Sound, vibration, LED indicator light
Buttons
Power + Volume (+, -) + UHF + SCAN + Custom
Voice and Audio
Built-in single speaker, built-in dual microphones
Performance Characteristics
CPU
Octa core 2.4GHz
Operating System
Android 14
Memory
4GB RAM / 64 GB Flash memory (optional 8GB+128GB)
User Environment
Operating Temp.
-4℉ / -20°C to +131℉ / +50°C
Storage Temp.
-40℉ / -40°C to +158℉ / +70°C (no battery)
Humidity
5% to 95%, non-condensing
Drop Spec.
Multiple drops from 4.9 ft. / 1.5 m
Sealing
IP67
Electrostatic Discharge (ESD)
±15kV Air discharge, ±8kV direct discharge
Sensor
G-sensor, light sensor, distance sensor, electronic compass, gyroscope
Data Capture
Scan Engine
Middle range 2D imager scan engine
Front Camera
Fixed focus. 5MP
Rear Camera
Auto-focus, 13 MP, support double flashlights, PDAF phase focusing
RFID Read/Write(UHF)- Standard Configuration
Read-write tag
Conforms to ISO-18000-6C/EPCC1G2
Antenna Parameter
5dBi circular polarization, default 902-928MHz
Frequency
860-930 MHz (customized according to country's regional regulations), default 920-925 MHz
Operation Mode
Operates as a frequency hopping spread spectrum (FHSS) or fixed frequency transmission mode
Output Power
1~33dBm
Reading Distance
≥9m @9662 white card (practical distance subject to label and environment)
Writing Distance
0-6m@9662 white card (practical distance subject to label and environment)
Group Reading Speed
Achieve 1300 frames/sec @impinj H47 (practical distance subject to label and environment)
Reading Rate
12 ms per separate character (32bits) on average
Writing Rate
60 ms per separate character (32bits) on average
Power Consumption
less than 10W (average)
GPS Location information collection
Positioning System
GPS+GLONASS+Beidou, support AGPS
Frequency
GPS: L1; Beidou: B1; GLONASS: L1
Accuracy
5-10meter
Wireless Connectivity
WLAN-Protocol
IEEE 802.11ac/a/b/g/n/d/e/h/i/j/k/r/v/w（2.4G/5G dual-band WIFI）
WLAN-Frequency Range
Depending on the country (region), 2.4GHz is 2.412GHz-2.472GHz; 5GHz is 5.180GHz-5.825GHz
WWAN-Network
Refer to the specifications for detailed parameters
Accessories
Standard
Power adapter×1, Type C data communication cable×1, SIM card removal tool×1
Third Party Application Support
System Software
Android 14.0
System Programming Environment
Android Studio